TM 55-1520-240-23-5
6-182.1
INSPECT COMBINING TRANSMISSION FAN ASSEMBLY AND FAN DRIVE
SHAFT (Continued)
6-182.1
INSPECT SNUBBER HELICOPTER (WITHOUT 66 )
2.
Inspect snubber (3) as follows:
a.
Lift the snubber from around the end of
transmission gear (4).
b.
Check the snubber for cuts, tears, and
erosion of seating surface (5). There shall
be no such damages.
c.
Install the snubber over the end of
transmission gear (4). Make sure the snubber
is fully seated.
INSPECT ADAPTERS HELICOPTER (WITH 66 )
3.
No inspection is required of adapters on
helicopter (With 66 ). Fan adapter (6) requires
no inspection, and transmission adapter (7) is
replaced at each phase inspection.
6-600
