TM 55-1520-240-23-5
6-181.2
INSPECT AND REPAIR COMBINING TRANSMISSION OIL COOLER FAN EXHAUST
DUCT
(Continued)
6-181.2
INSPECT DUCT ASSEMBLY
3.
Lift screen (4) out of duct assembly (5).
4.
Check screen (4) for holes and tears. Check
clips (6) for cracks and looseness. There shall
be no such damage.
5.
Check seal (7). Seal shall be flexible, with no
rips.
6.
Check duct assembly (5) for holes, tears, and
cracks that go all the way through the duct.
There shall be no such damage.
REPAIR DUCT ASSEMBLY
NOTE
Repair of duct is limited to
replacement of parts.
7.
Remove any of six clips (6) from screen (4) by
drilling out rivets (8). Install new clips with new
rivets and washers (9).
8.
Remove seal (7) by drilling out rivets (10 and 11).
9.
Separate duct halves (12) by drilling out rivets
(13) at both ends of halves.
10.
Join duct halves (12) with rivets (13) and washers
(14). Use one washer under head and one under
tail of each rivet.
11.
Install new seal (E-56) (7). Use rivets (10 and
11) and washers (15). Use one washer under
head and one under tail of each rivet.
12.
Install screen (4) on duct assembly (5).
6-594
