TM 55-1520-240-23-5
6-6
REMOVE COMBINING TRANSMISSION FORWARD ADAPTER ASSEMBLY (Continued)
6-6
4.
Clean splines of output shaft (7) using dry
cleaning solvent (E162) and cloths (E120). Wear
gloves (E184.1).
5.
Inspect splines on output shaft (7) for wear. If
wear is evident, proceed as follows:
a.
Place a straightedge (6 inch metal ruler or
equivalent) along the length of the spline,
with the ruler spanning the worn area.
b.
Using a feeler gauge, measure the depth of
wear below the face of the spline.
c.
If spline wear exceeds 0.005 inch, replace
combining transmission.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
Change 1
6-22.1/(6-22.2 blank)
