TM 55-1520-240-23-5
6-75
REMOVE COMBINING TRANSMISSION FROM STORAGE
6-75
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Sling (T34)
Work Hoist
Container, 2 Quart
Workstand (T20)
Materials:
Dry Cleaning Solvent (E162)
Cloths (E120)
Gloves (E186)
Personnel Required:
Medium Helicopter Repairer (2)
Inspector
Equipment Condition:
Off Helicopter Task
1.
Remove 24 nuts (1), washers (2 and 3), and
bolts (4) from cover (5). Remove cover.
2.
Remove and discard desiccant bags from
container (6).
3.
Remove four nuts (7), washers (8), and bolts (9)
from transmission (10).
4.
Connect sling (T34) (11) to two lugs (12).
Connect work hoist (13) to sling.
5.
With aid of helper, carefully lift transmission (10)
from container (6).
6.
Set transmission (10) down on workstand (T20).
Remove sling (T34) (11).
7.
Install four bolts (9), washers (8), and nuts (7) in
container (6).
8.
Install cover (5). Install 24 bolts (4), washers (3),
split washers (2) and nuts (1).
6-288
