TM 55-1520-240-23-5
6-30
REMOVE ENGINE DRIVE SHAFT (Continued)
6-30
NOTE
Remove left or right engine drive shaft
in same way. Right shaft shown here.
Removal of one-piece and riveted
shafts is similar. Differences are noted
in text. Riveted shaft shown here.
REMOVE SHAFT
CAUTION
Open end wrenches or open end
torque wrench adapters/spanners
are not to be used for torque checks
and/or removal and installation of
hardware. Damage to drive shaft can
result.
CAUTION
Prior to removal of any engine
drive shaft or adapter from shafts,
components are to be indexed.
Damage to drive shaft can result.
1.
Support shaft (1) with pad (2) of barrier material
(E80) or cloths (E120).
CAUTION
Do not allow bolts to turn. If bolts turn,
bolts and plates can be damaged.
2.
Remove three nuts (3), washers (4), and bolts
(5) from each end of shaft (1). During removal,
hold head of bolts with wrench.
Change 1
6-85
