TM 55-1520-240-23-4
5-113
LEAN INSTALLED SWASHPLATE
5-113
INITIAL SETUP
Applicable Configurations:
All
Tools:
None
Materials:
Cloth (E120)
Dry Cleaning Solvent (E162)
Gloves (E186)
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
One Forward and One Aft Rotary-Wing Blade Tied
Down (Task 1-26)
Work Platform Open As Required (Task 2-2)
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Do not use excessive solvent (E162).
Too much solvent can wash foreign
material into bearing and seal area.
NOTE
Procedure is same to clean forward
or aft swashplate. Aft swashplate is
shown in task.
1.
Clean swashplate (1). Use cloth (E120) damp
with solvent (E162). Wear gloves (E186).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
5-640
