TM 55-1520-240-23-4
5-87
REMOVE SHOCK ABSORBER
(Continued)
5-87
REMOVE ABSORBER WITHOUT 50
NOTE
Keep blade supported in sling while
shock absorber is removed.
8.
Have helper support shock absorber (15).
Remove cotter pin (16), nut (17), washer (18),
washer (19), and bolt (20). Remove shock
absorber and two Teflon washers (21).
9.
Install bolt (20), washer (19), washer (18), and
nut (17) in pitch housing lugs (22). Do not torque
at this time.
REMOVE ABSORBER WITH 50
NOTE
Keep blade supported in sling while
shock absorber is removed.
Use care when removing shock
absorber from inboard lugs, bushings
may be loose and fall from lugs.
10.
Have helper support shock absorber (15).
Remove cotter pin (16), nut (17), washer (18)
and bolt (20). Remove shock absorber.
NOTE
Verify that bushings are in place
before bolts are installed.
11.
Install bolt (20), washer (18) and nut (17) in pitch
housing lugs (22). Do not torque at this time.
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
5-524