TM 55-1520-240-23-4
5-72.1
REPLACE BLADE FAIRING TIP SECTION
(Continued)
5-72.1
INSTALL FAIRING REPLACEMENT ASSEMBLY
18.
Clean bonded assembly (9) and mating surfaces
of blade (1). Use a vacuum cleaner in core areas.
19.
Wear gloves (E186). Wipe assembly (9) and
blade (1) with clean cloths (E120) damp with
acetone (E20). Wipe dry with clean cloths before
acetone dries. Do not remove gloves.
NOTE
Wear gloves for remainder of task.
20.
Fit assembly (9) in position on blade (1). Mark
outline of wire mesh (5) on both sides of blade
(1). Remove assembly.
21.
Prepare adhesive mixture as in steps 9 and 10.
22.
Coat mating surfaces, including exposed core,
of blade (1) and assembly (9) with adhesive.
Record weight of adhesive used.
23.
Fit assembly (9) firmly into blade (1). Align
surfaces at trailing edge (7) and tip (8).
5-416
