TM 55-1520-240-23-4
5-73
REMOVE BLADE TIP COVER
5-73
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Materials:
Paper Tags (E264)
Personnel Required:
Medium Helicopter Repairer
References:
Task 5-82.1
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
Blade Positioned Over Tunnel, One Forward and One
Aft Blade Tied Down (Task 1-26)
Work Platforms Open as Required (Task 2-2)
NOTE
Procedure is same to remove any
blade tip cover. Forward blade tip
cover is shown here.
1.
Remove lockwire. Remove four screws (1) and
washers (2). Remove tip cover (3).
5-419