TM 55-1520-240-23-4
5-66.1
REPAIR OF NOSE CAP OR EROSION CAP UNBONDING
(Continued)
5-66.1
Acetone (E20) is extremely flammable.
It can be toxic. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
Keep away from heat, sparks, or open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
6.
Clean void (1). Fill plastic squeeze bottle (E366)
with acetone (E20). Flush void with acetone until
acetone runs clear. Allow to dry for 15 minutes.
Adhesive (E43) is toxic. It can
irritate skin and cause burns. Avoid
inhaling. Use only with adequate
ventilation. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
7.
Mix adhesive (E43) as follows:
a.
Mix 5 parts by weight of white base with 7
parts by weight of grey hardener. Use clean
polyethylene cup (E157) and trip balance.
b.
Stir mixture until color is uniform. Use
wooden spatula (E424).
NOTE
Adhesive has working life of about
30 minutes.
5-307
