TM 55-1520-240-23-4
5-66
REPLACE NICKEL EROSION CAP (AVIM)
(Continued)
5-66
15.
Prepare bonding surface (7) as follows:
a.
Sand bonding surface (7) lightly to remove
glaze. Use abrasive paper (E9).
b.
Mask area around bonding surface (7). Use
masking tape (E388) (8).
c.
Clean bonding surface (7) and replacement
cap. Use cloth (E120) damp with acetone
(E20). Wear gloves (E184.1). Wipe dry
with a clean cloth. Do not allow solvent to
evaporate.
d.
Remove masking tape (E388) (8).
5-298
