TM 55-1520-240-23-4
5-65
PREPARE ROTARY-WING BLADE FOR STORAGE
(Continued)
5-65
3.
Wrap blade (2) where blade will rest on six
support points (6). Use barrier material (E80)
(4) and tape (E388) (5).
4.
Open 22 turnlock fasteners (7). Remove cover
(8).
5.
Remove bolt (9), washers (10), and spacer (11).
6.
Check that hub mount (12) is installed leaning
away from record receptacle (13) for aft blade
(2). Hub mount leans toward receptacle for
forward blade.
7.
If necessary, remove four bolts (14) and position
mount (12) in opposite direction. Install bolts.
8.
Have helpers lift blade (2) and position in
shipping container (T86) (15). Place front blade
top side down.
9.
Install spacer (11), washers (10), and bolt (9).
10.
Install cover (8). Close 22 fasteners (7).
11.
Remove record receptacle cap (16). Insert
records in receptacle (13). Install cap.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
5-293
