TM 55-1520-240-23-4
5-48.1
REMOVE DROOP STOP SHROUD SHIELD
5-48.1
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
Tiedown Line Installed On One Forward and One Aft
Blade (Task 1-26)
Aft Pylon Work Platform Open (Task 2-2)
NOTE
There are three droop stop shroud
shields. Procedure is same to remove
any droop stop shroud shield.
1.
Remove lockwire. Remove two bolts (1) and
washers (2).
2.
Remove shield (3) from droop stop (4).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
5-209