TM 55-1520-240-23-3
4-29.1
REMOVE FORWARD ENGINE MOUNT ADAPTER
4-29.1
INITIAL SETUP
Applicable Configurations:
With 74
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Engine Sling (T134)
Hoist
Container, 2 Quart
Materials:
Tape (E388)
Paper Tags (E264)
Wiping Rags (E121)
Gloves (E184.1)
Lubricating Oil (E254)
Personnel Required:
Medium Helicopter Repairer (2)
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
Engine Work Platform Open (Task 2-2)
Engine Air Inlet Screens Removed (Task 4-65)
Engine Side and Lower Access Doors Open (Task
4-49)
Engine Transmission Fairing Removed (Task 4-70)
Engine Drive Shaft Removed (Task 6-30)
General Safety Instructions:
Fuels (JP4/JP5/JP8) (E182/E182.1)
are combustible and toxic. They can
irritate skin and cause burns. Use
only with adequate ventilation, away
from open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Oil (E254) is toxic and can irritate skin
and cause burns. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
In case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
4-161
