TM 55-1520-240-23-3
4-29.1
REMOVE FORWARD ENGINE MOUNT ADAPTER
(Continued)
4-29.1
5.
Disconnect two bonding jumpers (18).
6.
Disconnect cable plug (19) from oil pressure
transmitter (20). Disconnect oil hose (21). Drain
oil into container. Wipe up any spilled oil using
rags (E121). Wear gloves (E184.1).
7.
Install sling (22) as follows:
a.
Open access door (23) in engine access
cover (24).
b.
Connect two cables (25) to forward fittings
(26) on powerplant (27).
c.
Connect cable (28) into aft fitting (29) through
cover (24).
d.
Move eye (30) over center hole (31) in sling
bar (32).
e.
Install pin (33) through center hole in bar.
8.
Connect hoist (34) to eye (30) of sling (22).
Absorb weight of powerplant (27) with hoist.
9.
Remove nut (35), two washers (36), bolt (37),
spacer (38), and bushing (39) from aft engine
mount (40).
4-165
