TM 55-1520-240-23-3
3-62
DISASSEMBLE SWIVEL HOUSING AND SPINDLE (AVIM)
3-62
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Twist Drill Set, NSN 5133-00-293-0983
Aft Landing Gear Bearing Drift (T97)
Arbor Press
Electric Drill
Materials:
None
Personnel Required:
Machinist
Medium Helicopter Repairer (2)
References:
Task 3-34
Task 3-57
Task 3-59
Task 3-65
Task 3-66
Equipment Condition:
Off Helicopter Task
NOTE
Procedure is same for left or right
gear. Right gear is shown here.
1.
Remove end cap (1) and cover plate and seals
(1.1) (Task 3-57).
Plug is spring loaded. Remove
plug carefully to prevent injury to
personnel.
2.
Remove lockwire, plug (2), packing (3), and cam
centering spring (4) from swivel housing (5).
3.
Remove lockwire and two shoulder screws (6).
4.
Remove towing shackle (7) (Task 3-59).
5.
Push cam follower piston (8) away from control
cam (9) and remove swivel housing (5) from
spindle (10).
3-159
