TM 55-1520-240-23-3
3-60
INSTALL AFT LANDING GEAR TOWING SHACKLE
3-60
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 100 to 750 Inch-Pounds
Materials:
None
Parts:
Cotter Pin
Personnel Required
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
NOTE
Procedure is same for installing left or
right aft landing gear towing shackle.
Right shackle is shown here.
1.
Place towing shackle (1) over mounting lug (2)
in trailing position.
2.
Install bolt (3), washer (4), and nut (5).
3.
Torque nut (5) to 480 to 600 inch-pounds.
4.
Install new cotter pin (6).
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
3-154
