TM 55-1520-240-23-3
3-63
ASSEMBLE SWIVEL HOUSING AND SPINDLE (AVIM)
3-63
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Machine Shop Set, NSN 4920-00-405-9279
Vernier Caliper, 0 to 24 Inches
Aft Landing Gear Bearing Drift (T94)
Hand Lubricating Gun
Arbor Press or Oven
Materials:
Grease (E190)
Lockwire (E231)
Epoxy Primer (E292)
Gloves (E184.1)
Kevlar Gloves (E187)
Parts:
Packings
Cotter Pins
Retainers
Personnel Required:
Machinist
Medium Helicopter Repairer (2)
Inspector
References:
TM 55-1520-240-23P
Task 3-35
Task 3-58
Task 3-60
Task 3-65
Task 3-68
General Safety Instructions:
Wear Kevlar gloves (E187) when
handling heated parts. Injury to
personnel could result.
Epoxy primer (E292) is flammable
and toxic. It can irritate skin and
cause burns. Use only with adequate
ventilation, away from heat or open
flame, avoid contact with skin,
eyes, or clothing, in case of contact
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
3-162
