TM 55-1520-240-23-10
16-24
DISASSEMBLE AND INSPECT FORWARD OR AFT CARGO HOOK (AVIM)
(Continued)
16-24
57.
Remove lockwire, pin (116), and arm (117) and
washer (117.1) if installed. Remove shaft (118)
from rear plate (66). Remove packing (119) from
shaft. Tag (E264) arm and shaft together.
58.
Remove lockwire, pin (120), and arm (121) and
washer (117.1) if installed. Remove shaft (122)
from rear plate (66). Remove packing (119) from
shaft. Tag (E264) arm and shaft together.
59.
Remove lockwire, pin (123), and arm (124) and
washer (117.1) if installed. Remove shaft (125)
from rear plate (66). Remove packing (119) from
shaft. Tag (E264) arm and shaft together.
59.1.
Inspect shafts (118, 122, and 125). Shafts shall
not be bent. No straightening is allowed.
60.
Remove three nuts (126) and washers (127)
from inserts (128). Remove inserts from rear
plate (66).
61.
Remove packings (129) from inserts (128).
62.
Remove two caps (130), one from front plate
(65), one from rear plate (66). Use crowsfoot
attachment.
16-130
