TM 55-1520-240-23-10
16-5.1
DISASSEMBLE CENTER CARGO HOOK (AVIM)
(Continued)
16-5.1
28.
Remove six bolts (97), two cam plates (98), and
two cams (99 and 100) from formers (51 and 52).
29.
Remove two cotter pins (101), cam bearings pins
(102), and cam roller bearing (103) from cams
(99 and 100).
30.
Remove four bolts (104), four washers (105), and
two cam stops (106) from formers (51 and 52).
31.
Remove bolts (107), washers (108), and two cam
stops (109) from formers (51 and 52).
32.
Remove two bolts (110), washers (111), and
bracket (86) from former (54).
33.
Remove actuating cylinder support (46).
34.
Remove two bolts (112), washers (113), and
bracket (91) from actuating cylinder support (46).
35.
Remove nut (114), washers (115), washer (116),
bolt (117), and hook (118) from actuating cylinder
(42).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
16-46