TM 55-1520-240-23-10
16-3.5
ADJUST CENTER CARGO HOOK MANUAL RELEASE CABLE
(Continued)
16-3.5
1.
Manually close forward, center, and aft cargo
hooks (1, 2, and 3).
2.
Set manual release handle (4) in vertical position.
The center hook must be relatched in
accordance with Tasks 16-3 or 16-3.1
as applicable
3.
Check clearance at bellcrank (5) and cable ball
(6). Clearance shall be 0.0 to 0.10 inch.
4.
If clearance is within limits specified, go to step
8. If clearance is not within limits specified, go
to step 5.
16-29