TM 55-1520-240-23-10
16-3.4
INSTALL CENTER HOOK MANUAL RELEASE CABLE
(Continued)
16-3.4
1.
Route cable (1) through slot in bracket (2).
2.
Align holes in clevis (3) and lever (4). Install
straight head pin (5), washer (6), and cotter pin
(7).
3.
Check that cable (1) protrudes past bracket
(2) 0.70 to 0.75 inch. This dimension is for
initial installation and may change during final
adjustment.
4.
Hold jam nut (8). Tighten jam nut (9). Lockwire
nuts together. Use lockwire (E231).
5.
Route cable (1) through slot in bracket (10) and
over bellcrank (11).
16-26
