TM 55-1520-240-23-10
16-4.1
REMOVE CENTER CARGO HOOK
16-4.1
INITIAL SETUP
Applicable Configurations:
With 35
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Open End Wrench (2), 1-1/16 Inches (2)
Socket, 1/16 Inch
Materials:
None
Personnel Required:
Medium Helicopter Repairer (2)
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
Rescue Hatch Open (Task 2-2)
General Safety Precautions:
Before removing cargo hook, release
nitrogen precharge or personnel injury
could occur.
1.
Have helper support hook (1). Release stowage
strap (2).
2.
Lower hook (1) until it hangs free.
3.
Disconnect hose (3) at quick-disconnect (4).
4.
Disconnect electrical cable (5) at connector (6).
5.
Remove nut (7), washer (8), and screw (9) from
clamp (10).
16-34
