TM 55-1520-240-23-10
16-3.1
INSPECTION AND RELATCHING OF CENTER HOOK MANUAL RELEASE
MECHANISM
(Continued)
16-3.1
c.
Check bolt (2), block (1), sleeve spacer (3),
and keeper (4) for damage. Replace as
required.
d.
Inspect components of hook (5.1) (Task
16-6).
NOTE
During assembly procedure, manual
release mechanism will automatically
be assembled in relatched position.
e.
Assemble hook (5.1) (Task 16-7.1).
f.
Inspect the support fitting (17) on the beam
(15) for cracks and distortion.
g.
Install hook (5.1) (Task 16-8.1).
h.
Pull down on hook. Hook must be relatched.
FOLLOW-ON MAINTENANCE:
Perform operational check of hook (TM
55-1520-240-T).
END OF TASK
16-21
