TM 55-1520-240-23-10
16-3
INSPECTION AND RELATCHING OF CENTER HOOK MANUAL RELEASE
MECHANISM
(Continued)
16-3
c.
Check bolt (2), block (1), sleeve spacer (3),
and keeper (4) for damage. Replace as
required.
d.
Inspect components of hook (5) (Task 16-6).
NOTE
During assembly procedure, manual
release mechanism will automatically
be assembled in relatched position.
e.
Assemble hook (5) (Task 16-7).
f.
Install hook (5) (Task 16-8).
g.
Pull down on hook. Hook must be relatched.
FOLLOW-ON MAINTENANCE:
Perform operational check of hook (TM
55-1520-240-T).
END OF TASK
16-16
