TM 55-1520-240-23-10
16-3
INSPECTION AND RELATCHING OF CENTER HOOK MANUAL RELEASE MECHANISM
16-3
INITIAL SETUP
Applicable Configurations:
Without 35
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
Task 16-4
Task 16-5
Task 16-6
Task 16-7
Task 16-8
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
Rescue Hatch Lower Door at Lowest Position (Task
2-193)
Rescue Hatch Access Door Opened (Task 2-2)
Following a manual release under
load and before rematching, center
hook must be inspected. Otherwise,
damage which could affect operation
of manual release mechanism may
be overlooked.
1.
After each manual release, visually check block
(1), bolt (2), sleeve spacer (3) and keeper (4)
and beam (5) for damage, binding, or distortion.
There shall be no damage, binding, or distortion.
16-12