TM 55-1520-240-23-10
14-3.1
REPLACE WINCH LIMIT SWITCHES
(Continued)
14-3.1
REMOVE OVERLOADLIMIT SWITCH
12.
Repeat steps 1 thru 5.
13.
Remove two nuts (14).
14.
Remove switch (15) from cable tension bracket
(16).
INSTALL OVERLOAD LIMIT SWITCH
15.
Position switch (15) in slots of cable tension
bracket (16) so that it is actuated by load on
second layer of cable (17).
16.
Apply light coat of sealant (E330) to thread of
screws (18). Wear gloves (E186).
17.
Tighten two nuts (14).
INSPECT
18.
Position winch (9). Install four bolts (7) and
washers (8).
14-20
