TM 55-1520-240-23-10
14-3
ADJUST WINCH LIMIT SWITCHES
(Continued)
14-3
ADJUST OVERLOAD LIMIT SWITCH
33.
Set switch lever (7) to CARGO.
34.
Have helper keep slight pull on cable (8) as cable
reels out. Helper must wear gloves (E185).
35.
Reel out cable (8) until it is fully extended (TM
55-1520-240-T).
36.
Attach 3100 to 3300 pound drag load to cable
(8).
37.
With load attached, reel in cable (8) until two
layers of cable are wrapped on drum (9).
38.
Repeat step 17.
39.
Loosen two nuts (24). Position switch (25) in
slots of cable tension bracket (26) so that it is
actuated by load on second layer of cable (8).
40.
Apply light coat of sealant (E330) to thread of
screws (27). Tighten nuts (24).
INSPECT
41.
Repeat step 20.
42.
Test winch (17) (TM 55-1520-240-T).
43.
Turn off electrical and hydraulic power.
14-15