TM 55-1520-240-23-10
14-4
REMOVE WINCH
(Continued)
14-4
REMOVE WINCH
4.
Remove three screws (4). Remove cable panel
(5).
5.
Remove four bolts (6) and washers (7).
6.
Reach under structure (8) and remove nut (9)
and washer (10). Remove bolt (11) and washer
(12).
7.
Move pulley (13) outboard along bracket (14).
8.
Slide winch (15) away from structure (8). At
same time, have helper pull cable (16) through
cable guard (17). Pull cable (16) out from
between pulley (13) and bracket (14).
Winch weighs 56 pounds. Do not lift
winch without help. Personal injury
can result.
Take care not to damage electrical
connector or wiring when removing
winch.
9.
Secure cable (16) to winch (15). Remove winch
from compartment.
14-23
