TM 55-1520-240-23-10
13-17
INSTALL HEATER FAN
13-17
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Materials:
Lockwire (E231)
Parts:
Gasket
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
1.
Remove barrier material and tape from adapter
(1).
2.
Position fan (2) and gasket (3) on adapter (1)
with receptacle (4) 90º from combustion tube (5).
3.
Align holes in fan (2), adapter (1), and gasket (3).
Install 8 screws (6), 8 nuts (7), 16 washers (8),
and 1 clamp (9).
13-70