TM 55-1520-240-23-10
13-18
REMOVE AIR INLET DUCT
(Continued)
13-18
4.
Remove eight nuts (7) and washers (8).
5.
Remove air inlet duct (9) and wire fabric (10).
6.
Remove seal (11) if worn, deformed, or otherwise
damaged.
7.
From outside helicopter have helper remove four
screws (12) and four snap fasteners (13).
8.
Cover opening in top of fan (14). Use barrier
material (E80) and tape (E388).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
13-73
