TM 55-1520-240-23-10
13-19
INSTALL AIR INLET DUCT
13-19
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Stiff-Bristled Brush
Workstand
Materials:
Cement (E103)
Cloths (E120)
Sealant (E336)
Solvent (E161)
Gloves (E186)
Personnel Required:
Medium Helicopter Repairer (2)
Inspector
References:
TM 55-1520-240-23P
General Safety Instructions:
Solvent (E161) is flammable and
toxic. It can irritate skin and cause
burns. Use only in well-ventilated
area away from heat and open flame.
In case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
Sealant (E336) can irritate skin and
cause burns. Avoid contact with skin,
eyes, and clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Cement (E103) is flammable and
toxic. It can irritate skin and cause
burns. Use only with adequate
ventilation, away from heat or open
flame. Avoid contact with skin, eyes,
or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
13-74
