TM 55-1520-240-23-10
13-15
ASSEMBLE HEATER FAN (500702-5310) (AVIM)
(Continued)
13-15
ASSEMBLE MOTOR
1.
Install bearing (1) in stator (2) and bearing (3) on
rotor (4) (TM 55-1500-322-24).
2.
Slide rotor (4) into stator (2). Make sure shaft (5)
bottoms on bearing (1).
3.
Install loading washer (6) and endbell (7) in stator
(2). Install retaining ring (8), flat side down.
4.
Install retaining ring (9), flat side down.
INSPECT
ASSEMBLE FAN
5.
Install motor (10) in housing (11). Align wires
(12) with hole (13). Align four screw holes (14)
with four holes (15) in housing.
6.
Install four screws (16) and washers (17).
7.
Lockwire screws (16). Use lockwire (E230).
INSPECT
13-65