TM 55-1520-240-23-9
11-204
INSTALL LCT ACTUATOR ROD END BEARING (AVIM)
11-204
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 100 to 750 Inch-Pounds
Crowfoot Attachment, 1 Inch
Vise, Soft Jaws
Materials:
Lockwire (E231)
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
Task 11-203
NOTE
Procedure is same to install rod end
bearing in forward LCT actuator
(145CS114-1) or aft LCT actuator
(145C5114-2).
Rod end bearing (1140S118-2) is
used for LCT actuator (145CS114-1).
Rod end bearing (114CS123-1) is
used for LCT actuator (145CS114-2).
1.
Install checknut (1) and spring tension clip (2)
on rod end bearing (3).
2.
Position actuator (4) in vise (5). Install rod end
bearing (3) in actuator shaft (6).
11-812