TM 55-1520-240-23-9
11-157
ASSEMBLE THRUST CCD ACTUATOR (AVIM)
(Continued)
11-157
19.
Apply coat of silicone grease (E461) to end (38)
of amplifier (39). Position amplifier with pin (40)
up and outward on chassis (13).
20.
Apply coat of sealant (E345) to two screws (41).
Install two washers (42) and screws in chassis
(13) and amplifier (39). Wear gloves (E184.1).
21.
Solder six wires (43) to amplifier (39). Use
sleeving (E204), solder (E360), and soldering
gun. Remove tags.
22.
Position cover (44) on chassis (13). Install four
washers (45) and screws (46) in cover and
chassis.
23.
Install two washers (47) and screws (48) in
receptacle (20) and cover (44). Lockwire screws.
Use lockwire (E229).
11-643