TM 55-1520-240-23-9
11-155
DISASSEMBLE THRUST CCD ACTUATOR (AVIM)
(Continued)
11-155
18.
Remove rivet (39) and spacer (40) from nut
(41). Remove nut from shaft (42). Turn
counterclockwise.
19.
Remove shims (43), three sprIng washers (44),
plate (45), and disc (46) from shaft (42).
20.
Remove cotter pin (47), nut (48), two washers
(49), and pin (50) from arm (51). Remove arm
from shaft (42).
21.
Remove bearing (52) from arm (51). Use arbor
press.
22.
Remove two discs (53), two plates (54) from
shaft (42).
23.
Remove arm (55), disc (56), plate (57), spacer
(58), and shims (59) from shaft (42).
FOLLOW-ON MAINTENANCE:
Inspect servo motor (Task 11-156).
END OF TASK
11-638
