• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ASSEMBLE PITCH,  ROLL OR  YAW SPRING ASSEMBLY (AVIM) (Continued) - TM-55-1520-240-23-9_626
ASSEMBLE PITCH,  ROLL OR  YAW SPRING ASSEMBLY (AVIM) (Continued) - TM-55-1520-240-23-9_628

TM-55-1520-240-23-9 CH-47D Heilcopter Manual
Page Navigation
  600    601    602    603    604  605  606    607    608    609    610  
TM  55-1520-240-23-9 11-143 ASSEMBLE  PITCH, ROLL OR  YAW SPRING ASSEMBLY  (AVIM) (Continued) 11-143 Do  not  lubricate  any  parts  of  spring assembly, except  as  noted; otherwise, component  malfunction  can  occur. NOTE Wipe  all  components  with  dry cloth (E120). 4. Install  piston  (4) large  diameter  inward,  on  rod (5). 5. Install  spring  (6) on  rod  (5). 6. Remove  tag  from  shims (7).  Install  shims on  rod. 7. Install  piston  (8) small  diameter inward,  on  rod (5). 8. Install  washer (9) and  nut  (10) on  rod  (5).  Torque nut  to  25  inch-pounds.   Continue  tightening to  align  cotter  pin  holes.   Do  not  exceed  35 inch-pounds.   Install an  AN960-416(L) washer (9.1) between washer (9) and  nut (10) as required to  align  cotter pin  (11).  Install  cotter pin  (11). 11-611







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.