TM 55-1520-240-23-9
11-143
ASSEMBLE PITCH, ROLL OR YAW SPRING ASSEMBLY (AVIM)
(Continued)
11-143
9.
Clamp bearing end (12) of housing (1) in vise
(13).
10.
Install rod (5), spring (6) inward, in housing (1).
Antiseize thread compound (E76) can
irritate skin and cause burns. Avoid
contact with skin, eyes, or clothing.
In case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
11.
Apply a thin coat of antiseize thread compound
(E76) to threads of cap (14). Use gloves
(E184.1). Install cap (14) on housing (1). Torque
cap to 135 inch-pounds.
12.
Lockwire cap (14) to housing (1). Use lockwire
(E231).
13.
Remove housing (1) from vise (13).
INSPECT
FOLLOW-ON MAINTENANCE:
Adjust spring assembly (Task 11-145).
END OF TASK
11-612
