TM 55-1520-240-23-9
11-42
RIG COCKPIT CONTROL ASSEMBLIES
(Continued)
11-42
1.
Rig yaw controls. Press lever (1) of pilots pedals.
Position right pedal (2) forward. Install pedal rig
pin (T127) (3) in left pedal tube (4) and between
two lugs (5) of fixture (6).
2.
Pull pedal (2) aft to center adjustment hole (7).
Release lever (1). Align pedal tube (8) and pin
(3). Slide pin in tube. If pin slides in tube, go to
step 19. If pin and tube do not align, perform
steps 3 thru 18.
3.
Slide rig pin (T127) (9) of copilots pedals, in
pedal tube 10. Press lever (11) and position
pedal (12) forward. Release lever.
4.
Remove pin (9) from tube (10).
11-162