TM 55-1520-240-23-9
11-42
RIG COCKPIT CONTROL ASSEMBLIES
(Continued)
11-42
5.
Move bellcrank (13) for access to link (14).
6.
Remove cotter pin (15), nut (16), two washers
(17), and bolt (18) from bellcrank (13).
Disconnect link.
7.
Move bellcrank (19) for access to link (14).
8.
Remove cotter pin (20), nut (21), two washers
(22), and bolt (23) from bellcrank (19).
Disconnect link (14) from bellcrank. Slide link
fully right.
9.
Loosen nut (24) of link (14).
10.
Slide link (14) left. Position link in two bellcranks
(13 and 19). Install bolt (23) loosely in bellcrank
(19) and link (14).
11.
Install pin (9) in tube (10) of copilots pedal.
12.
Press lever (11). Pull right pedal (12) aft to center
adjustment hole (24). Release lever (11). Align
pedal tube (25) and pin (9). Slide pin in tube.
11-163