TM 55-1520-240-23-9
11-42
RIG COCKPIT CONTROL ASSEMBLIES
(Continued)
11-42
Wires must not support housing;
otherwise, damage to equipment
could occur.
22.
Remove left landing light housing (35) from
access (36). Support housing so it does not
hang by wires (37).
23.
Remove gasket (38) from housing (35).
24.
Strap housing (35) to access (36) at aft end with
strap (39). Wires (37) must not support housing.
Use strap (E376).
25.
Working through left access (36), remove cotter
pin (40), nut (41), and washer (42) from bolt (43).
26.
Lift bolt (43) to release link (44). Disconnect link
from bellcrank (45). Lower bolt in bellcrank.
27.
Loosen nut (46) on link (44).
11-167