• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
DISASSEMBLE  AFCS  CONTROL PANEL (AVIM) (Continued) - TM-55-1520-240-23-9_1040
REPLACE AFCS  CONTROL PANEL NON-NVG  (RED) LENSES WITH NVG (BLUE/GREEN) LENSES (Continued)

TM-55-1520-240-23-9 CH-47D Heilcopter Manual
Page Navigation
  1004    1005    1006    1007    1008  1009  1010    1011    1012    1013    1014  
TM  55-1520-240-23-9 11-270.1 REPLACE  AFCS  CONTROL PANEL NON-NVG (RED)  LENSES  WITH NVG (BLUE/GREEN) LENSES 11-270.1 INITIAL  SETUP Applicable Configurations: All Tools: Tool  Kit,  Electronic  Equipment  TK-105/G,  NSN 5180-00-610-8177 Materials: Sealant  (E345) Parts: Screw,  10-32,  2  Inches  Long NVG  Filters,  NSN 6220-01-354-5557 Personnel  Required: Avionics  Navigation  Flight  Control  Equipment Repairer Inspector Equipment  Condition: Off  Helicopter  Task 1. Turn  two  fasteners  (1)  1/4  turn. 2. Remove  rear cover  (2). 3. Remove  two  setscrews  (5)  from  knob  (6). 4. Remove  knob  (6) from rotary  switch  shaft  (7). 5. Remove  three  screws (8). NOTE Be  careful  when  removing  illumination panel at lamp  receptacle  connector. 6. Remove  front  illumination  panel  (9).   Use common  screwdriver to  pry loose  at  receptacle connector (10). 7. Remove  twelve  screws  from  the  back  of  the illumination  panel. 8. Remove  fourteen  red  plastic  inserts  using  a 10-32  screw  by threading  screw into  insert. 9. Install  fourteen  NVG  Filters  (NSN 6220-01-354-5557). 10. Install  twelve  screws  into  the  back  of  the illumination  panel. 11-1025







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.