• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REPLACE ENGINE OIL PRESSURE TRANSMITTER  VIBRATION  ISOLATOR CLAMPS
INSTALL  ENGINE  OIL PRESSURE  TRANSMITTER

TM-55-1520-240-23-7 CH-47D Heilcopter Manual
Page Navigation
  39    40    41    42    43  44  45    46    47    48    49  
TM  55-1520-240-23-7 8-15.2 REPLACE  ENGINE  OIL  PRESSURE  TRANSMITTER  VIBRATION  ISOLATOR CLAMPS (Continued) 8-15.2 NOTE Procedure  is  same  for  No.   1  and No.  2  isolator  mount  clamps.  No.  2 clamps are  shown  here. 1. Position  helper inside  aft  fuselage. 2. Remove  eight  bolts  (1) from  outside  and  eight collars  (2)  from  inside. 3. Remove  two  clamps  (3). 4. Position  serviceable  clamp  (3) on  structure  with clamp  opening  outboard. 5. Install  four bolts (1) from  outside  and  four collars (2)  from  inside. 6. Repeat steps  4  and  5  for other  clamp  (3). INSPECT FOLLOW-ON MAINTENANCE: Install  oil  pressure  transmitter  and  vibration  isolator mount  (Task  8-16.1). END  OF  TASK 8-47







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.