TM 55-1520-240-23-7
8-15.1
REMOVE ENGINE OIL PRESSURE TRANSMITTER AND VIBRATION ISOLATOR
MOUNT
(Continued)
8-15.1
4.
Remove two nuts (3) and open two clamps (4).
5.
Remove transmitter (5) and mount (6).
6.
Loosen two nuts (7) and screws (8).
7.
Remove transmitter (5) from mount (6).
8.
Remove dampener (9) and packing (10) from
transmitter (5).
9.
Remove screw (11), lockwasher (12), and
washer (13) from transmitter (5).
FOLLOW-ON MAINTENANCE:
Replace transmitter isolator mount clamps (if
necessary) (Task 8-15.2).
END OF TASK
8-45
