TM 55-1520-240-23-7
9-64
INSTALL TAIL POSITION LIGHT
9-64
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairers Tool Kit, NSN 5180-00-323-4915
Workstand
Materials:
Sealant (E336)
Acetone (E20)
Cloths (E120)
Gloves (E186)
Personnel Required:
Aircraft Electrician
Inspector
References:
TM 55-1520-240-23P
1.
If light (1) is replacement, perform the following:
a.
Remove two screws (2), retainer (3), lens (4),
and seal (5) from light (1).
b.
Remove two screws (6) and washers (7) from
terminals (8 and 9).
9-224