TM 55-1520-240-23-7
9-49
REMOVE NO. 2 GENERATOR CONTACTOR
(Continued)
9-49
NOTE
Procedure is same for removal of
generator contactor from No. 1 or No.
2 power distribution panel. Removal of
generator contactor from No. 2 power
distribution panel is shown here.
1.
Loosen six fasteners (1) and open power
distribution panel door (2).
2.
Remove two screws (3) and washers (4).
Remove contactor cover (5).
3.
Tag and disconnect nine wires (6) from contactor
(7) by removing nine nuts (8) and washers (9).
Tape ends. Use tape (E385).
4.
Disconnect electrical connector (10).
5.
Remove four bolts (11) and washers (12).
Remove contactor (7).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-147