TM 55-1520-240-23-7
8-100
REMOVE HYDRAULIC MAINTENANCE PANEL COMPONENTS
(Continued)
8-100
NOTE
Procedure is the same to remove
GND RESET/TEST and FLIGHT
CONTROL HYDRAULIC RESERVOIR
LEVEL SELECT SWITCH. Removal
of GND RESET/TEST SWITCH is
shown here.
6.
Remove GND RESET/TEST SWITCH as follows:
a.
Tag and remove five wires (30) from switch
(31). Use contact insertion/removal tool.
Remove lacing tape as necessary.
b.
Remove nut (32) and lockwasher (33) from
switch (31).
c.
Tag and remove switch (31) from panel (9).
d.
Remove locking ring (34) from switch (31).
8-314