TM 55-1520-240-23-7
8-100
REMOVE HYDRAULIC MAINTENANCE PANEL COMPONENTS
(Continued)
8-100
8.
Remove UTILITY HYDRAULIC RESERVOIR
LEVEL check switch as follows:
a.
Tag and unsolder two wires (40) from switch
(41). Remove lacing tape and shrink tubing
as necessary.
b.
Remove nut (42) and lockwasher (43) from
switch (41).
c.
Tag and remove switch (41) from panel (9).
NOTE
Procedure is the same to remove 30
terminal modules using the CTJ-R06
module extraction tool. Removal of
10 diode modules requires using the
CTJ-R 12 module extraction tools.
Removal of TB2-1 is shown here.
9.
Remove TB2-1 terminal module as follows:
a.
Tag and disconnect twelve wires (44) from
module (45). Use insertion/removal tool.
b.
Tag and remove module (45) from module
mounting track (46). Use module extraction
tool.
8-316
