TM 55-1520-240-23-7
8-100
REMOVE HYDRAULIC MAINTENANCE PANEL COMPONENTS
(Continued)
8-100
NOTE
Procedure is similar to remove like
components. Task contains 12
separate removals.
1.
Remove WORK LIGHT as follows:
a.
Tag and disconnect white wire (1) from
TB4(2)6F. Use contact insertion/removal tool.
b.
Tag and disconnect black wire (3) from
TB4(2)7G. Use contact insertion/removal
tool.
c.
Remove screw (4), washer (5), and clamp (6).
d.
Remove wires (1 and 3) from wire harness
(7). Remove lacing tape as necessary.
e.
Pull wires (1 and 3) through grommet (8).
f.
Remove grommet (8) from panel (9).
g.
Remove work light (10) from base (11).
h.
Remove two screws (12) and washers (13).
i.
Tag and remove base (11) from panel (9).
8-310