TM 55-1520-240-23-5
6-187
REMOVE COMBINING TRANSMISSION OIL COOLER
(Continued)
6-187
12.
Remove six nuts (30) and washers (31) from
around inside of cooler (6).
13.
Remove nuts (32), washers (33), and bolts (34)
at four places around aft part of cooler (6).
Remove three nuts (35) and washers (36) from
forward edge of cooler.
NOTE
Do not tilt cooler. Oil can spill.
14.
Lift cooler (6) straight up and away from sump
cover (29) and two oil transfer tubes (37).
NOTE
Transfer tubes may stay in cooler.
15.
Remove two transfer tubes (7) and four packings
(38).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
6-618
